Introduction » Parts SIMSON
Spare parts SIMSON
Type S50, S51 Enduro/Elektronik, S70
- MZA parts
- Recommended sets
- Accessories
- Bowdens & Rods
- Carburettor
- Cylinder-Crank mechanism
- Wheels-Brakes
- Engine-Bearings-Seals
- Fuel tank
- Front fork-Steering
- Gears / Shifting
- Frame-Stand-Footrests
- Handlebars
- Seats
- Clutch
- Lighting
- Exhaust muffler with knee
- Rear shocks
- Stickers
- Suction
- Ignition-Electrical
Spare parts catalog - Simson S50,S51 Size: (A5) Language of the text: Czech Number of pages: 57
Our Price 4.76 EUR
Spark plug (CZ) - BRISK N14C Single-electrode wide-range spark plug with a middle electrode made of a special alloy filled with a copper core with high thermal conductivity. Exchange interval: max. 30.000 km Thread: M 14x1,25 Recommended tightening torque: 20-30 Nm Thread length: 12,7 mm Wrench size: 21 mm NOTICE: The strictly specified tightening torque for mounting the spark plug to the engine
Our Price 2.16 EUR
Spark plug (CZ) - BRISK N15C Single-electrode wide-range spark plug with a middle electrode made of a special alloy filled with a copper core with high thermal conductivity. Exchange interval: max. 30.000 km Thread: M 14x1,25 Recommended tightening torque: 20-30 Nm Thread length: 12,7 mm Wrench size: 21 mm NOTICE: The strictly specified tightening torque for mounting the spark plug to the engine
Our Price 2.16 EUR
Spark plug (CZ) - BRISK N17C Single-electrode wide-range spark plug with a middle electrode made of a special alloy filled with a copper core with high thermal conductivity. Exchange interval: max. 30.000 km Thread: M 14x1,25 Recommended tightening torque: 20-30 Nm Thread length: 12,7 mm Wrench size: 21 mm NOTICE: The strictly specified tightening torque for mounting the spark plug to the engine
Our Price 2.16 EUR
Spark plug connector 5 kilo-ohm (MZA) - Simson, MZ Note: The spark plug terminal has an interference suppression of 5 Kilo-ohms. The connector is waterproof, bent at an angle of 90°. Can be used for: Simson MZ The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 5.39 EUR
Speedometer (80 km/h), backlit - JAWA 50 Pionýr, Babetta, S50 Note: mechanical / D = 50 Can be used for: JAWA Babetta type 207 (1-speed) JAWA Babetta type 210 (2-speed) JAWA Babetta type 225 (2-speed) JAWA Pionýr 50 type 05 JAWA Pionýr 50 type 20 JAWA Pionýr 50 type 21 JAWA Pionýr 50 type 23 (Mustang) Simson Schwalbe Simson Simson S50 Simson Star
Our Price 42.75 EUR
STOCK
Speedometer / rev-counter drive pinion housing (MZA) - Simson S51, S70, SR50 Note: This is an original spare part. Can be used: Simson S51, S70, SR50, KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 4.50 EUR
Speedometer / Revcounter frame 60mm, CHROME (MZA) - Simson S51, S53, S70 Note: Designed for speedometer with diameter of 60 mm. Can be used: Simson S51, S53, S70 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 9.53 EUR
Speedometer drive 1105mm (1,80x1,80mm) - Simson SR50, SR80 DIAMETERS: Drive ends: square 1,80 x 1,80 mm Bowden cable length without nuts: 1105 mm (± 2 mm) Aluminum nuts M10 x 1.0 Can be used for: Simson SR50, SR80
Our Price 5.21 EUR
Speedometer drive 852mm (1,80x1,80mm) - Simson S50, S51, S53, S70, S83 DIAMETERS: Drive ends: square 1,80 x 1,80 mm Bowden cable length without nuts: 852 mm (± 2 mm) Aluminum nuts M10 x 1.0 Can be used for: Simson S50, S51, S53, S70, S83
Our Price 5.39 EUR
Speedometer drive gear for 14t. wheel (MZA) - Simson S51, S70, SR50, KR51/2 Note: The speedometer drive gear is complete. The parts are made of metal and plastic. Speedometer drive is designed for 14t. wheel. This is an original spare part. Can be used: Simson S51, S70, SR50, KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 29.29 EUR
Speedometer drive gear for 15t. wheel (MZA) - Simson S51, S70, SR50, KR51/2 Note: The speedometer drive gear is complete. The parts are made of metal and plastic. Speedometer drive is designed for 15t. wheel. This is an original spare part. Can be used: Simson S51, S70, SR50, KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 25.87 EUR
Speedometer drive gear for 16t. wheel (MZA) - Simson S51, S70, SR50, SR80 Note: The speedometer drive gear is complete. The parts are made of metal and plastic. Speedometer drive is designed for 16t. wheel. Motor M500-M700. This is an original spare part. Can be used for: Simson S51, S53, S83, SR50, SR80 The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA
Our Price 26.41 EUR
Speedometer drive gear pinion 13t. (MZA) - Simson S70, S83, SR50, SR80 Note: Speedometer drive gear pinion 13 teeth. / Designed for 16 teeth sprocket. Can be used for: Simson S70, S83, SR50, SR80 The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 11.50 EUR
Speedometer drive gear pinion 14t. (MZA) - Simson S51, S53, S83, KR51/2 Note: Speedometer drive gear pinion 14 teeth. / Designed for 15 teeth sprocket. Can be used for: Simson S51, S53, S83, KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 11.50 EUR
Speedometer drive gear pinion 15t. (MZA) - Simson S51, S53 Note: Speedometer drive gear pinion 15 teeth. / Designed for 14 teeth sprocket. Can be used for: Simson S51, S53 The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 11.50 EUR
Speedometer frame 48mm, CHROME (MZA) - Simson S50, S51, KR51, SR4-2/3/4 Note: Designed for speedometer with diameter of 48 mm. Can be used: Simson S50, S51, Schwalbe KR51, Star SR4-2, Sperber SR4-3, Habicht SR4-4 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 9.17 EUR
Speedometer pinion 10t. (MZA) - Simson S51, S70, SR50, KR51/2 Note: The speedometer drive gear is complete. The parts are made of metal and plastic. Speedometer drive is designed for 14t. wheel. This is an original spare part. Can be used: Simson S51, S70, SR50, KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 7.91 EUR
Speedometer plexiglass (MZA) - Simson SR50, SR80 can be used for: Simson SR50, SR80 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 12.94 EUR
Speedometer with indicator (100km/h), BLACK FRAME (MZA) - Simson S51, S53, S70 Note.: Speedometer up to 100 km/h with indicator light. The Speedometer has a diameter of 60 mm. This is an original spare part. Can be used for: Simson S51, S53, S70 MMB by Pulsotronic is worldwide active supplier of sensor technology and electric components for automation and automotive. The product of the
Our Price 56.78 EUR
Speedometer with indicator (100km/h), CHROME FRAME (MZA) - Simson S51, S53, S70 Note.: Speedometer up to 100 km/h with indicator light. The Speedometer has a diameter of 60 mm. This is an original spare part. Can be used for: Simson S51, S53, S70 MMB by Pulsotronic is worldwide active supplier of sensor technology and electric components for automation and automotive. The product of the
Our Price 58.93 EUR
Speedometer, BLACK (MZA) - Simson SR50, SR80 Note.: Speedometer in black colour with a speed of up to 100 km/h. (Bulbs and sockets are not included). This is an original spare part. Can be used: Simson SR50, SR80 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 81.03 EUR
Speedometer, WHITE (MZA) - Simson SR50, SR80 Note.: Speedometer in white colour with a speed of up to 100 km/h. (Bulbs and sockets are not included). This is an original spare part. Can be used: Simson SR50, SR80 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 78.68 EUR
Splash guard, BLACK (MZA) - Simson S50,S51,S70 Can be used for: Simson S50, S51, S70 The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 2.69 EUR
Splash guard, BLACK (MZA) - Simson SR50, SR80 Can be used for: Simson SR50, SR80 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 5.75 EUR
Splash guard, CHROMED LOOK (MZA) - Simson S50, S51, S70 Can be used for: Simson S50, S51, S70 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 8.80 EUR
Spoke M3,5-148, CHROME (16") - Simson Note.: Spoke of nut is sold without a nut, which must be purchased separately. Can be used for: Simson
Our Price 0.78 EUR
Spoke M3,5-148, STAINLESS (16") - Simson Note.: Spoke of nut is sold without a nut, which must be purchased separately. Can be used for: Simson
Our Price 0.36 EUR
Spoke M3,5-148, ZINC (16") - Simson Note.: Spoke of nut is sold without a nut, which must be purchased separately. Can be used for: Simson
Our Price 0.35 EUR
Sponge for washing and cleaning (multi) Double-sided sponge with soft and rough side for gentle washing and removal of resistant dirt
Our Price 1.47 EUR
Spring for balls of drive shaft (MZA) - Simson Can be used for: Simson S51, S53, S70, S83, SR50, SR80, KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 2.70 EUR
Spring of air filter - clasp - Simson Brand Type Simson Schwalbe Simson Simson S 50 Simson Simson S 51 typ Electronic ( 50,60,70) Simson Simson S 51 typ Enduro ( 50,60,70) Simson Simson SR - skutr ( 50,60,70 ) Simson Star
Our Price 0.87 EUR
Spring of brake shoes (MZA) - Simson Can be used for: Simson S50, S51, S53, S70, S83, SR50, SR80, SD50, KR51, Spatz, Sperber, Star The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 2.16 EUR
Spring of carburetor slide (BVF) - Simson Note.: Spring of carburetor slide is designed for all BFV carburetors: 16N1, 16N3, 19N1. It is an original spare part.
Our Price 0.96 EUR
Spring of carburetor slide AMAL - Simson Note: Spring is designed for carburetor slide of the AMAL carburetor. This is an original spare part. DIMENSIONS outer diameter: 17mm wire thickness: 0.95mm nominal length: 68mm
Our Price 1.08 EUR
Spring of carburetor slide BING - Simson, Manet Korádo Note: Spring of slide is designed for the BING carburetor. This is an original spare part. Can be used for: Simson Manet korádo Carburetors BING for motorcycles ... BING produces carburettors for motorcycles from 50 to more than 1000 ccm for over 70 years. Experienced engineers optimize the development of carburettors for fuel consumption and
Our Price 4.76 EUR
Spring of clutch control shaft (MZA) - Simson S51, S53, S70, SR, KR51/2 Can be used for: Simson S51, S53, S70, S83, SR50, SR80, SD50, Schwalbe, Sperber The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 2.52 EUR
Spring of foot brake pedal (MZA) - Simson Can be used for: Simson S50, S51, S53, S70, SR50 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 2.88 EUR
Spring of front forks, 3,2mm (MZA) - Simson Note: thickness - 3.2 mm (standard) spring length - 310 mm (± 5 mm) Can be used for: Simson S50, S51, S53, S70, SR50 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 4.32 EUR
Spring of front forks, 3,4mm (MZA) - Simson Note: thickness - 3,4 mm (hard) spring length - 330 mm (± 5 mm) Can be used for: Simson S50, S51, S53, S70, SR50 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 7.01 EUR
Spring of front parabola (MZA) - Simson Note: 3 pcs are needed for front parabola. Can be used: Simson S50, S51, S70 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 1.97 EUR
Spring of inner shift lever (MZA) - Simson S51, S70, SR50, SR80, KR51/2 Note: It is original spare part. Can be used for: Simson S51, S70, SR50, SR80, KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 2.16 EUR
Spring of main stand (MZA) - Simson Can be used for: Simson S50, S51, S53, S70, S83, SR50, SR80, KR51, SR2, SR4, Sperber The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 2.52 EUR
Spring of shaft to clutch control Simson.
Our Price 0.87 EUR
Spring of main stand (MZA) - Simson Can be used for: Simson S50, S51, S70, S53, S83, SR50, SR80 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 3.96 EUR
Spring screws of carburator- S22, Jawa 05,20-23,Simson,Babetta
Our Price 0.39 EUR
Sprocket wheel driver 12t. (MZA) - Simson S51, S53, S70, SR Can be used: Simson S51, S53, S70, S83, SR50, SR80, SD50, KR51/2, Sperber The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 5.10 EUR
Sprocket wheel driver 13t. (MZA) - Simson S51, S53, S70, SR Can be used: Simson S51, S53, S70, S83, SR50, SR80, SD50, KR51/2, Sperber The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 6.47 EUR
Sprocket wheel driver 14t. (MZA) - Simson S51, S53, S70, SR Can be used: Simson S51, S53, S70, SD 50, SR50, SR80, KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 6.65 EUR
Sprocket wheel driver 15t. (MZA) - Simson S51, S53, S70, SR Can be used: Simson S51, S53, S70, SD 50, SR50, SR80, KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 6.65 EUR
Sprocket wheel driver 16t. (MZA) - Simson S51, S53, S70, SR Can be used: Simson S51, S53, S70, SD 50, SR50, SR80, KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 8.08 EUR
Sprocket wheel driver 17t. (MZA) - Simson S51, S53, S70, SR Can be used: Simson S51, S53, S70, SD 50, SR50, SR80, KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 8.08 EUR
Stand (MZA), BLACK - Simson Roller SR50, SR80 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 64.61 EUR
Stand, main (U-Profile) 16" (MZA) - Simson S50, S51, S53, S70, S83 Note: The main stand has a U profile. This is an original spare part. Can be used for: Simson S50, S51, S53, S70, S83 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 31.80 EUR
Stand, main (Z-Profile) 16" (MZA) - Simson S50, S51, S53, S70, S83 Note: The main stand has a Z profile. There is a hole for the rubber bumper. This is an original spare part. Can be used for: Simson S50, S51, S53, S70, S83 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 42.58 EUR
Stand, main - Simson Schwalbe, Star Can be used for: Simson Schwalbe Simson Star
Our Price 14.01 EUR
Stand, side 12" (MZA), BLACK - Simson SR50, SR80 Note: The side stand for Simson for 12-inch wheels is equipped with 2 springs. Prevents independent folding down while driving. The attachment is made on the rear thru axle. The side stand is self-folding. Can be used for: Simson SR50, SR80 The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA
Our Price 19.58 EUR
Stand, side 16" (MZA), BLACK - Simson S50, S51, S70 Enduro Note: The side stand for Simson for 16-inch wheels is equipped with 2 springs. Prevents independent folding down while driving. The attachment is made on the rear thru axle. The side stand is self-folding. The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 17.79 EUR
Stator fixing clamp - Simson Can be used for: Simson S50 Simson S51 type Electronic ( 50,60,70) Simson S51 type Enduro ( 50,60,70) Simson SR - scooter ( 50,60,70 ) Star Schwalbe
Our Price 2.87 EUR
Stator, BREAKER 12V (TWN) - Simson S51, S70, SR50 Can be used for: Simson S51, S70, SR50, KR51/2
Our Price 30.67 EUR
STOCK
Stator, BREAKER 6V (AKA) - Simson S51, S70, SR50 Note: Original production of AKA ELECTRIC. Can be used for: Simson S51, S70, SR50, KR51/2
Our Price 62.79 EUR
Stator, CONTACTLESS 12V 42/21W Bilux (MZA) - Simson S51, S53, S70 Note: Magnet stator 8305.2/4-100 is designed for 12V ignition with Bilux headlights. Version 12V 42/21W Bilux. This is an original spare part. Can be used: Simson S51, S53 a S70 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 68.09 EUR
Stator, CONTACTLESS 12V 42/21W Bilux (MZA) - Simson SR50, SR80 Note: Magnet stator 8305.2-100 is designed for 12V ignition with Bilux headlights. Version 12V 42/21W Bilux. This is an original spare part. Can be used: Simson SR50, SR80 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 65.40 EUR
Stator, CONTACTLESS 12V 42/21W Bilux (MZA) - Simson S51, S53, S70 Note: Magnet stator 8305.2/2-100 is designed for 12V ignition with Halogen headlights. Version 12V 42/21W Bilux. This is an original spare part. Can be used: Simson S51, S53, S70, S83 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 85.52 EUR
Stator, CONTACTLESS 12V 42/21W Halogen (MZA) - Simson SR50, SR80 Note: Magnet stator 8305.2/1-100 is designed for 12V ignition with Halogen headlights. Version 12V 42/21W Bilux. This is an original spare part. Can be used: Simson SR50, SR80 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 71.80 EUR
Stator, CONTACTLESS 6V 35/21W Bilux (MZA) - Simson S51, S70 Note: Magnet stator 8305.1/4-100 is designed for 6V ignition with Bilux headlights. Version 6V 35/21W Bilux. This is an original spare part. Can be used: Simson S51 E, S51 C, S51/1 E, S51/1 C, S70 E, S70/1 E. The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 73.48 EUR
Steering + Clipboard lock set (MZA) - Simson S51, S70 Spare part suitable for SIMSON. Set includes steering lock and side cover lock. Locking system with 2 keys (one key for everything). This is an original spare part. Can be used for: Simson S51, S70 (since 1988) The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 19.41 EUR
Steering + Clipboard lock set (MZA) - Simson SR50, SR80 Spare part suitable for SIMSON. Set includes steering lock and side cover lock. Locking system with 2 keys (one key for everything). This is an original spare part. Can be used for: Simson SR50, SR80 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 21.08 EUR
