Introduction » Parts MZ 150/250 ETZ
Parts MZ 150/250 ETZ
- Accessories
- Bowdens
- Carburettor
- Wheels-Brakes
- Engine-Bearings-Seals
- Fuel tank
- Front fork-Steering
- Gears-Transmission
- Frame
- Handlebars
- Seats
- Clutch
- Stand-Footrests
- Lighting
- Suction
- Exhaust muffler with knee
- Cylinder-Crankshaft
- Rear shocks
- Ignition-Electrical
Seat cover (without inscription), BLACK - MZ TS Note: Does not contain MZ inscription. Can be used for: MZ 125 TS MZ 150 TS MZ 250 TS
Our Price 9.88 EUR
Seat cover, BLACK - MZ ETZ Can be used for: MZ 125 ETZ MZ 150 ETZ MZ 250 ETZ ( standard,luxus ) MZ 251 ETZ MZ 301 ETZ ( 1991 )
Our Price 9.88 EUR
STOCK
Set for aluminum and other nonferrous metals, type C (100 mm) Used for polishing HARDLY oxidized aluminum and other non-ferrous metals. For each type of paste, we recommend your own disc. Do not confuse disks that are used for sanding with discs that you use to polish!!! The paste is applied to the spinning wheel and gently applying to the disc for about 4sec. The application time affects the
Our Price 23.35 EUR
Set for aluminum and other nonferrous metals, type C (130 mm) Used for polishing HARDLY oxidized aluminum and other non-ferrous metals. For each type of paste, we recommend your own disc. Do not confuse disks that are used for sanding with discs that you use to polish!!! The paste is applied to the spinning wheel and gently applying to the disc for about 4sec. The application time affects the
Our Price 24.07 EUR
Set of winkers, FRONT, CLEAR (MZA) - Simson, MZ Note.: Product of the German company MZA. The product conforms to the E homologation. The mounting is intended for turn signal holders with a diameter of 10 mm. The approved operating voltage is 12V. Set includes: round direction indicator, left 1 pcs round direction indicator, right 1pcs indicator lamp gasket 3 pcs Bulbs are not included! Can be
Our Price 17.79 EUR
Set of winkers, FRONT, ORANGE (MZA) - Simson, MZ Note.: Product of the German company MZA. The product conforms to the E homologation. The mounting is intended for turn signal holders with a diameter of 10 mm. The approved operating voltage is 12V. Set includes: round direction indicator, left 1 pcs round direction indicator, right 1pcs indicator lamp gasket 3 pcs Bulbs are not included! Can be
Our Price 17.07 EUR
Set of winkers, REAR, CLEAR (MZA) - Simson, MZ Note.: Product of the German company MZA. The product conforms to the E homologation. The mounting is intended for turn signal holders with a diameter of 10 mm. The approved operating voltage is 12V. Set includes: round direction indicators 2 pcs indicator lamp gasket 3 pcs Bulbs are not included! Can be used for: Simson S50, S51, S70, SR50, SR80 MZ
Our Price 17.79 EUR
Set of winkers, REAR, ORANGE (MZA) - Simson, MZ Note.: Product of the German company MZA. The product conforms to the E homologation. The mounting is intended for turn signal holders with a diameter of 10 mm. The approved operating voltage is 12V. Set includes: round direction indicators 2 pcs indicator lamp gasket 3 pcs Bulbs are not included! Can be used for: Simson S50, S51, S70, SR50, SR80 MZ
Our Price 17.07 EUR
Set of winkers, SQUARE, CLEAR (MZA) - Simson, MZ Note.: Product of the German company MZA. The product conforms to the E homologation. The mounting is intended for turn signal holders with a diameter of 15 mm. The approved operating voltage is 12V. Can be used front or rear. Set includes: Square direction indicators 2 pcs Indicator seals Bulbs are not included! Can be used for: Simson S51, S53,
Our Price 26.77 EUR
Set of winkers, SQUARE, ORANGE (MZA) - Simson, MZ Note.: Product of the German company MZA. The product conforms to the E homologation. The mounting is intended for turn signal holders with a diameter of 15 mm. The approved operating voltage is 12V. Can be used front or rear. Set includes: Square direction indicators 2 pcs Indicator seals Bulbs are not included! Can be used for: Simson S51, S53,
Our Price 35.76 EUR
Set screw of bowden M6x30 - slicing through Brand Type ČZ ČZ 125 A ČZ ČZ 125 B ČZ ČZ 125 T ČZ ČZ 125 typ 453 ČZ ČZ 125 typ 473 - Sport ČZ ČZ 125,150 C ČZ ČZ 175 rikša typ 505 ČZ ČZ 175 skutr typ 501 - dvouvýfuk ČZ ČZ 175 skutr typ 502 - jednovýfuk ČZ ČZ 175 typ 450 ČZ ČZ 175 typ 470 - Sport ČZ ČZ 250 typ 455 ČZ ČZ 250 typ 471 - dvouválec ČZ
Our Price 1.43 EUR
Shock absorber oil - MOL Hydro SA 15 (1000 ml) Operating fluid for hydraulic shock absorbers for vehicles. Excellent hydraulic oil of viscosity class ISO VG 15 for equipment where performance level ISO-L-LM (DIN HLP) is required. Product features Low low temperature viscosity / Ensures proper operation of hydraulic controls even in winter Compatible with common sealing materials / Lower
Our Price 6.29 EUR
Shock absorbers, rear (set 2pcs) CHROME (TWN) - MZ Note: Set includes 2pcs of shock absorbers. Oil-spring rear shock absorbers for Simson with manual adjustment of hardness. DIMENSIONS length (between the centers of mounting holes): 365 mm mounting holes (sleeve): internal diameter - 12 mm TECHNICAL SPECIFICATIONS spring: chromed hardness adjustment: 2 steps
Our Price 30.67 EUR
STOCK
Sifter of fuel valve 12x10x70 (MZA) - Simson, MZ Can be used for: Simson S50, S51, S70, SR1, SR2, SR4-2, SR4-3, SR4-4, SR50, SR80, KR51/1, KR51/2, MZ ETZ125, ETZ150, ETZ250, ETZ251, ETZ301, TS250 The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 2.52 EUR
Silentblock of engine - MZ ETZ Can be used for: MZ MZ 125 ETZ MZ MZ 150 ETZ MZ MZ 250 ETZ ( standard,luxus ) MZ MZ 251 ETZ MZ MZ 301 ETZ ( 1991 )
Our Price 4.50 EUR
SILICHROM EX - Chrome cleaning and polishing paste (120g) Paste for cleaning and polishing chrome, metals and brass. It allows you to effectively clean and polish oxidized, corrosion-damaged chrome and metal parts of cars and motorcycles.
Our Price 3.96 EUR
Sleeves of winkers, set (MZA) - Simson, MZ Note: Suitable for all Simson and MZ models with round blinkers. Can be used: Simson, MZ The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 2.34 EUR
Socks for best motorbike rider (36-41), RED - Black pistons & shock-absorbers Design socks made in Czech republic. Size 36-41. Composition: 80% Cotton / 15% Polyamide / 5% Elastan
Our Price 4.50 EUR
Socks for best motorbike rider (36-41), WHITE - Black pistons & shock-absorbers Design socks made in Czech republic. Size 36-41. Composition: 80% Cotton / 15% Polyamide / 5% Elastan
Our Price 4.50 EUR
Socks for best motorbike rider (42-46), RED - Black pistons & shock-absorbers Design socks made in Czech republic. Size 42-46. Composition: 80% Cotton / 15% Polyamide / 5% Elastan
Our Price 4.50 EUR
Socks for best motorbike rider (42-46), WHITE - Black pistons & shock-absorbers Design socks made in Czech republic. Size 42-46. Composition: 80% Cotton / 15% Polyamide / 5% Elastan
Our Price 4.50 EUR
SOUDAL - Metal plastic extra fine 1kg Extra fine, high quality two component polyester based body filler for the finishing of damaged surfaces prior to painting. The extra fine formulation is very easy to sand and smoothen. Applications: Filling of scratches, tears and dents in metal plates, including zinc and galvanized steel. Reparing scratches and dents in cars. Repairs of metal, polyester and
Our Price 12.24 EUR
STOCK
SOUDAL - Metal plastic standard 250g General purpose, high quality two component polyester body filler for the repair of damaged surfaces (scratches, dents and tears) in metals, polyester or timber. Very easy to mix and apply. Applications: Filling of scratches, tears, dents in metal plates, even zinced and galvanized. Repairing scratches, cracks, dents in cars. Repairs of metal, polyester and
Our Price 5.59 EUR
STOCK
SOUDAL - Polyfiber 250g High quality, glass fibre reinforced, two component polyester body filler for the repair of damaged surfaces (dents, scratches and tears) in metals, wood or polyester. Very easy to mix and apply. Fast curing and can be sanded after about 20 minutes. The glass fibres add additional strength to weakened car body parts. Applications: Heavy duty filling of scratches, tears,
Our Price 6.31 EUR
STOCK
Spark plug (CZ) - BRISK N14C Single-electrode wide-range spark plug with a middle electrode made of a special alloy filled with a copper core with high thermal conductivity. Exchange interval: max. 30.000 km Thread: M 14x1,25 Recommended tightening torque: 20-30 Nm Thread length: 12,7 mm Wrench size: 21 mm NOTICE: The strictly specified tightening torque for mounting the spark plug to the engine
Our Price 2.16 EUR
Spark plug (CZ) - BRISK N15C Single-electrode wide-range spark plug with a middle electrode made of a special alloy filled with a copper core with high thermal conductivity. Exchange interval: max. 30.000 km Thread: M 14x1,25 Recommended tightening torque: 20-30 Nm Thread length: 12,7 mm Wrench size: 21 mm NOTICE: The strictly specified tightening torque for mounting the spark plug to the engine
Our Price 2.16 EUR
Spark plug (CZ) - BRISK N17C Single-electrode wide-range spark plug with a middle electrode made of a special alloy filled with a copper core with high thermal conductivity. Exchange interval: max. 30.000 km Thread: M 14x1,25 Recommended tightening torque: 20-30 Nm Thread length: 12,7 mm Wrench size: 21 mm NOTICE: The strictly specified tightening torque for mounting the spark plug to the engine
Our Price 2.16 EUR
Spark plug connector 5 kilo-ohm (MZA) - Simson, MZ Note: The spark plug terminal has an interference suppression of 5 Kilo-ohms. The connector is waterproof, bent at an angle of 90°. Can be used for: Simson MZ The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 5.39 EUR
Spoke M3,5-121, ZINC (16") - JAWA-ČZ, ČZ 450-455 Note.: Spoke of nut is sold without a nut, which must be purchased separately. Can be used for: ČZ 125 type 453 ČZ 175 type 450 ČZ 250 type 455 JAWA-ČZ 125 type 351 JAWA-ČZ 125 type 355 JAWA-ČZ 125 type 355 JAWA-ČZ 175 type 356
Our Price 0.35 EUR
Spoke M4-121, CHROME (16") - JAWA-ČZ, ČZ 450-455, MZ Note.: Spoke of nut is sold without a nut, which must be purchased separately. Can be used for: ČZ 125 type 453 ČZ 175 type 450 ČZ 250 type 455 JAWA-ČZ 125 type 351 JAWA-ČZ 125 type 355 JAWA-ČZ 125 type 355 JAWA-ČZ 175 type 356 MZ 125 ETZ MZ 150 ETZ MZ 250 ETZ ( standard,luxus ) MZ 251 ETZ MZ 301 ETZ (1991)
Our Price 0.78 EUR
Spoke M4-121, ZINC (16") - JAWA-ČZ, ČZ 450-455, MZ Note.: Spoke of nut is sold without a nut, which must be purchased separately. Can be used for: ČZ 125 type 453 ČZ 175 type 450 ČZ 250 type 455 JAWA-ČZ 125 type 351 JAWA-ČZ 125 type 355 JAWA-ČZ 125 type 355 JAWA-ČZ 175 type 356 MZ 125 ETZ MZ 150 ETZ MZ 250 ETZ ( standard,luxus ) MZ 251 ETZ MZ 301 ETZ (1991)
Our Price 0.35 EUR
Spoke M4-124, CHROME (16") - JAWA-ČZ, ČZ 450-455, MZNote.: Spoke of nut is sold without a nut, which must be purchased separately.Can be used for: ČZ 125 type 453 ČZ 175 type 450 ČZ 250 type 455 JAWA-ČZ 125 type 351 JAWA-ČZ 125 type 355 JAWA-ČZ 125 type 355 JAWA-ČZ 175 type 356 MZ 125 ETZ MZ 150 ETZ MZ 250 ETZ MZ 251 ETZ MZ 301 ETZ
Our Price 0.78 EUR
Spoke M4-124, ZINC (16") - JAWA-ČZ, ČZ 450-455, MZ Note.: Spoke of nut is sold without a nut, which must be purchased separately. Can be used for: ČZ 125 type 453 ČZ 175 type 450 ČZ 250 type 455 JAWA-ČZ 125 type 351 JAWA-ČZ 125 type 355 JAWA-ČZ 125 type 355 JAWA-ČZ 175 type 356 MZ 125 ETZ MZ 150 ETZ MZ 250 ETZ MZ 251 ETZ MZ 301 ETZ
Our Price 0.37 EUR
Sponge for washing and cleaning (multi) Double-sided sponge with soft and rough side for gentle washing and removal of resistant dirt
Our Price 1.47 EUR
Spring cup fuse of kick starter wheel - MZ 150 ETZ Can be used for: MZ MZ 125 ETZ MZ MZ 125 typ TS MZ MZ 150 ETZ MZ MZ 150 type TS
Our Price 0.36 EUR
Sprocket wheel driver 13t. (MZA) - MZ 125/150 ETZ Can be used for: MZ 125 ETZ, 150 ETZ The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 11.32 EUR
Sprocket wheel driver 14t. (MZA) - MZ 125/150 ETZ Can be used for: MZ 125 ETZ, 150 ETZ The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 11.50 EUR
Sprocket wheel driver 15t. (MZA) - MZ 125/150 ETZ Can be used for: MZ 125 ETZ, 150 ETZ The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 11.68 EUR
Sprocket wheel driver 15t. (MZA) - MZ 250 ETZ Can be used for: MZ 250 ETZ The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 19.76 EUR
Sprocket wheel driver 16t. (MZA) - MZ 125/150 ETZ Can be used for: MZ 125 ETZ, 150 ETZ The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 11.86 EUR
Sprocket wheel driver 16t. (MZA) - MZ 250 ETZ Can be used for: MZ 250 ETZ The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 19.76 EUR
Sprocket wheel driver 18t. (MZA) - MZ 250 ETZ, TS Can be used for: MZ 250 ETZ, TS The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 20.66 EUR
Starter segment (MZA) - MZ 125/150 ETZ, TS, ES Can be used for: MZ 125 ETZ, 150 ETZ MZ 125 ES, 150 ES MZ 125 TS, 150 TS The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 17.43 EUR
Starter shaft - MZ 150 ETZ Can be used for: MZ 150 ETZ
Our Price 10.60 EUR
Starter spring - MZ 150 ETZ Can be used for: MZ MZ 125 ETZ MZ MZ 150 ETZ
Our Price 4.50 EUR
Starter spring - MZ 250 ETZ Can be used: MZ MZ 250 ETZ ( standard,luxus ) MZ MZ 251 ETZ MZ MZ 301 ETZ ( 1991 )
Our Price 1.80 EUR
Starter wheel spring - MZ 150 ETZ Can be used for: MZ MZ 125 ETZ MZ MZ 125 type TS MZ MZ 150 ETZ MZ MZ 150 type TS
Our Price 1.44 EUR
Stator 8046.2-210, three-phase alternator, hammer ignition (MZA) - MZ ETZ Original spare parts from remaining DDR stock. Due to their age, new items may show signs of storage such as rust, scratches, etc. Can be used for: MZ ETZ125, ETZ150, ETZ250, ETZ251 The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62,
Our Price 88.03 EUR
Stator 8046.2-210, three-phase alternator, ignition (MZA) - MZ ETZ Original spare parts from remaining DDR stock. Due to their age, new items may show signs of storage such as rust, scratches, etc. Can be used for: ETZ125, ETZ150, ETZ250, ETZ251, ETZ301 The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62,
Our Price 68.09 EUR
Stator 8046.2/2-200, three-phase alternator, electronic ignition (MZA) - MZ ETZ Can be used for: MZ ETZ125, ETZ150, ETZ250, ETZ251 The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 66.30 EUR
Steering lock, 60 mm (MZA) - Simson SR, S51, S70, MZ ETZ Can be used for: Simson S51, S53, S70, S83, SR50, SR80 MZ ETZ 125, 150, 250, 251, 301 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 10.60 EUR
Sticker "chessboard" - SILVER/BLACK Width of stripe: 20 mm Length of stripe: 1000 mm
Our Price 3.59 EUR
Sticker "chessboard" - SILVER/GOLD Width of stripe: 31 mmLength of stripe: 1000 mmNumber of strips in the package: 1 pieces
Our Price 3.59 EUR
Sticker "chessboard" - WHITE/GOLD Width of stripe: 31 mmLength of stripe: 1000 mmNumber of strips in the package: 1 pieces
Our Price 3.60 EUR
Sticker of box, LEFT (IFA) - MZ Can be used for: MZ MZ 125 ETZ MZ MZ 125 type TS MZ MZ 150 ETZ MZ MZ 150 type TS MZ MZ 250 ETZ ( standard,luxus ) MZ MZ 250 type TS MZ MZ 251 ETZ MZ MZ 301 ETZ ( 1991 )
Our Price 0.78 EUR
Sticker of box, RIGHT (IFA) - MZ Can be used for: MZ MZ 125 ETZ MZ MZ 125 type TS MZ MZ 150 ETZ MZ MZ 150 type TS MZ MZ 250 ETZ ( standard,luxus ) MZ MZ 250 type TS MZ MZ 251 ETZ MZ MZ 301 ETZ ( 1991 )
Our Price 0.78 EUR
Stickers, set (IFA) - MZ 125 ETZ Can be used for: MZ MZ 125 ETZ
Our Price 3.46 EUR
Stickers, set (IFA) - MZ 150 ETZ Can be used for: MZ MZ 150 ETZ
Our Price 3.46 EUR
Stickers, set (IFA) - MZ 250 ETZ Can be used for: MZ MZ 250 ETZ
Our Price 3.46 EUR
Stickers, set (IFA) - MZ 251 ETZ Can be used for: MZ MZ 251 ETZ
Our Price 3.46 EUR
Stones for honing cylinders tool (32-90mm) for drill Note: 50 mm long stones intended for honing tools 32 - 90 mm. Set includes stones (3 pcs) and mounting pins.
Our Price 3.60 EUR
Suction cuff - MZ 125/150 Can be used for: MZ MZ 125 ETZ MZ MZ 150 ETZ
Our Price 5.79 EUR
Suction cuff - MZ 250 Can be used for: MZ MZ 250 ETZ ( standard,luxus ) MZ MZ 251 ETZ MZ MZ 301 ETZ ( 1991 )
Our Price 5.03 EUR
Switch of lights 8626.21/2 (DE) - Simson S50, MZ TS ES Note: The switch has a cutout for cables and is made of plastic. Can be used for: Simson S50, S51 MZ TS125, TS150, TS250, ES125, ES150, ES175, ES250
Our Price 12.57 EUR
Switch of winkers (MZA) - Simson, MZ ETZ, JAWA, ČZ Note: 8626.17 Can be used for: Simson S51, S53, S70, S83, SD 50, SR50, SR80 MZ ETZ125, ETZ150, ETZ250, ETZ251, ETZ301 JAWA 350 typ 634, 638, 639, 640 ČZ typ 488, 487 The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 6.65 EUR
Switch of winkers 8606.7 (DE) - Simson S50, MZ TS ES Note: The switch has a cutout for cables and is made of plastic. Can be used for: Simson S50, S51 MZ TS125, TS150, TS250, ES125, ES150, ES175, ES250
Our Price 7.43 EUR
