Introduction » Parts JAWA 50 type 05,20-23 » MOTIP - Foam cleaner
MOTIP - Foam cleaner
STOCK
Full specifications
MOTIP - Foam cleaner
Spray to protect textile and leather from moisture and the adhesion of dirt. As a result of the unique formula, an invisible, protecting film is formed, which is water-repellent, however, breathing and effectively prevents renewed adhesion of dirt. MoTip Impregnation Spray gives lasting protection and is user-friendly.
QUALITY AND PROPERTIES
- Water-repellent
- Breathing
- Invisible
- Prevents the adhesion of dirt
- Lasting protection
- User-friendly
PHYSICAL AND CHEMICAL DATA
- Basis: Flourinated Acrylic Copolymer
- VOC-content: approximately 98,8% w/w
- Colour: transparent
- Smell: characteristic
- Relative density at 20°C: 0.73 g/ml
- Vapour pressure at 20°C: 3 - 4 bar
- Yield: 1,7 g/sec
- Coverage: 4 - 5 m²
- Drying time: approximately 1 hour
- Size:
aerosol can, maximum nominal volume 500 ml
INSTRUCTION MANUEL
Before use, carefully read and observe the warning texts on the label!
Application:
- Bring can to room temperature.
- Operating temperature 5° to 30° C.
- Shake for 2 minutes before use.
- The surface should be clean and dry.
- Apply impregnation spray in several thin layers with an interval of 5 to 10 minutes.
TIPS FOR SPRAY PAINTING
Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.
Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!
