Introduction » Parts JAWA 50 type 05,20-23 » MOTIP - Carburettor cleaner
MOTIP - Carburettor cleaner
STOCK
Full specifications
MOTIP - Carburettor cleaner
Cleaner for the interior and the exterior of carburettors and valves, without disassembly. Carburettor cleaner has high dissolving properties and leaves no residue. MoTip Carburettor Cleaner is non corrosive and has a directed jetspray.
QUALITY AND PROPERTIES
- Directed jetspray
- High dissolving properties
- Leaves no residue
- Non-corrosive
- 360° valve
PHYSICAL AND CHEMICAL DATA
- Basis: Hydrocarbons
- VOC-content: 100% w/w
- Colour: transparent
- Smell: characteristic
- Relative density at 20°C: 0.84 g/ml
- Yield: 3,00 g/sec.
- Vapour pressure at 20°C: 3 - 4 bar
- Storage stability:
10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) - Size:
aerosol can, maximum nominal volume 500 ml
INSTRUCTION MANUEL
Before use, carefully read and observe the warning texts on the label!
Application:
- Bring can to room temperature.
- Operating temperature 5° to 30°C.
- Shake can before use.
- Switch off the engine and allow to cool down. Remove the air filter.
- Spray the exterior of the carburettor until the contamination has disappeared.
- Spray the visible part of the interior of the carburettor and allow to take effect.
- Start the engine and let idl with very limited speed. Spray carburettor cleaner several times at the air inlet and increase the speed of the engine. Switch the engine off and install the air filter.
TIPS FOR SPRAY PAINTING
Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.
Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!
