Introduction » Parts JAWA 50 type 05,20-23 » Carburettor » Dellorto suction set PHBG 17-21mm, SIDE - JAWA 50 type 23 (Mustang)
Dellorto suction set PHBG 17-21mm, SIDE - JAWA 50 type 23 (Mustang)
Manufacturer description:
Intake elbow for Dellorto PHBG carburetor for Jawa 23 mustang motorcycle. Can be used with a diffuser diameter of 17, 19, 21 mm. When using this set together with the dellort, you will achieve greater reliability, the engine will run better at speed and a large possibility of setting the mixture both on the original cylinder and to use the potential of the modified cylinder.
Aimed perpendicular to the frame, suitable for use with a star head where a forward-facing elbow cannot be used. Can be rotated to the right or left side.
Inner diameter of the suction elbow 23mm, outer 25mm, flange according to the original dimensions - can be expanded up to 28x18mm, material stainless steel - polished, rubber coupling resistant to gasoline and temperature up to 260 ° C.
Air filter diameter according to the type of carburetor used. For type PHBG 17.5, 19, 21, the filter flange has a diameter of 38 mm, so if you decide to use a Stage 6 air filter - short with a 35 mm flange, you have 3 options - lightly grind / rotate the flange on a lathe, place the filter on a 38 mm flange and or directly without a flange (it is best to turn the flange)
To use the carburetor on the original engine, we recommend a diffuser diameter of 17mm or (rather) 19mm, for modified engines 19mm or 21mm (depending on the cylinder used)
The complete set includes: suction elbow, rubber coupling, 2 clips, nuts, washers and sockets for mounting