Dellorto suction set PHBG 17-21mm - JAWA 50 type 20

Full specifications

Dellorto suction set PHBG 17-21mm - JAWA 50 type 20

Manufacturer's description:

Intake elbow for Dellorto PHBG carburetor for Jawa 50 type 20 motorcycle. It fits under the cover without modifications. Can be used with a diffuser diameter of 17, 19, 21 mm. When using this set together with the dellort, you will achieve greater reliability, the engine will run better at speed and a large possibility of setting the mixture both on the original cylinder and to use the potential of the modified cylinder. The carburettor has a permitted carburetor tilt of up to 40 °.

The pioneer set types 20 and 21 differ in rotation. The J20 has less space due to the revmap plate - the knee is turned more outwards.

Inner diameter of the suction elbow - 23mm, outer 25mm. The flange is made according to the original dimensions, the rubber couplings are resistant to petrol and temperatures up to 260 ° C.

It is calculated using an air filter with a flange diameter of 35mm (Eg: Stage 6 short).

When used with a star head, it must be slightly removed from the ribs.

To use the carburetor on the original engine, we recommend a diffuser diameter of 17mm or (rather) 19mm, for modified engines 19mm or 21mm (depending on the cylinder used)

The complete set includes: suction elbow, filter elbow, two rubber couplings, 4 clips, stainless steel nuts, washers and sockets for mounting

Material: SANDBLASTED (BALLOTINATED SURFACE)