Introduction » Parts JAWA 350 OHC (2017) » Cylinder-Crankshaft
Parts JAWA 350 OHC (2017) / Cylinder-Crankshaft
Gasket of cylinder head (JAWA) - JAWA 350 OHC Can be used for: JAWA 350 OHC type 845 Original product of JAWA Moto spol s r. o.
Our Price 12.44 EUR
Extruder of piston pin (10-18 mm) - UNI ČZ ČZ - prewar (1930-1939) ČZ ČZ 125 A ČZ ČZ 125 B ČZ ČZ 125 T ČZ ČZ 125 type 453 ČZ ČZ 125 type 473 - Sport ČZ ČZ 125 type 476 ČZ ČZ 125 type 488 ČZ ČZ 125 type 511 cross ČZ ČZ 125 type 516 cross ČZ ČZ 125 type 519 cross ČZ ČZ 125,150 C ČZ ČZ 175 rikša type 505 ČZ ČZ 175 skutr type 501 ČZ ČZ 175
Our Price 16.16 EUR
Gasket under cylinder (JAWA) - JAWA 350 OHC Can be used for: JAWA 350 OHC type 845 Original product of JAWA Moto spol s r. o.
Our Price 3.12 EUR
Gasket under cylinder head, STEEL (JAWA) - JAWA 350 OHC Can be used for: JAWA 350 OHC type 845 JAWA 350 OHC type 845 Special JAWA 350 OHC type 845 Scrambler Original product of JAWA Moto spol s r. o.
Our Price 15.28 EUR
Neutral switch, probe - JAWA 350 OHC Can be used for: JAWA 350 OHC type 845 Original product of JAWA Moto spol s r. o.
Our Price 10.24 EUR
STOCK
O-ring of valve cover (JAWA) - JAWA 350 OHC Can be used for: JAWA 350 OHC type 845 JAWA 350 OHC type 845 Special JAWA 350 OHC type 845 Scrambler Original product of JAWA Moto spol s r. o.
Our Price 0.72 EUR
Poweroff switch (JAWA) - JAWA 350 OHC Can be used for: JAWA 350 OHC type 845 Original product of JAWA Moto spol s r. o.
Our Price 17.07 EUR
Spark plug (JAWA) - JAWA 350 OHC Can be used for: JAWA 350 OHC type 845 Original product of JAWA Moto spol s r. o.
Our Price 14.20 EUR
Stones for honing cylinders tool (32-90mm) for drill Note: 50 mm long stones intended for honing tools 32 - 90 mm. Set includes stones (3 pcs) and mounting pins.
Our Price 3.60 EUR
Timing chain (JAWA) - JAWA 350 OHC Can be used for: JAWA 350 OHC type 845 Original product of JAWA Moto spol s r. o.
Our Price 37.83 EUR
Timing chain guide (JAWA) - JAWA 350 OHC Can be used for: JAWA 350 OHC type 845 Original product of JAWA Moto spol s r. o.
Our Price 3.81 EUR
Tool for honing cylinders (32-90mm) for a drill Note: The honing device is used for honing (cleaning), i.e. finishing processing of very precise surfaces that require a multi-directional surface structure (e.g. cylinders of internal combustion engines) Note: Honing must be done at low speeds and the cylinder must be lubricated with oil. At the same time, it is necessary to be careful not to get a
Our Price 15.10 EUR
Valve cover (JAWA) - JAWA 350 OHC Can be used for: JAWA 350 OHC type 845 Original product of JAWA Moto spol s r. o.
Our Price 14.20 EUR
