Introduction » Parts JAWA 90 » Cylinder-Crankshaft
Parts JAWA 90 / Cylinder-Crankshaft
Extruder of piston pin (10-18 mm) - UNI ČZ ČZ - prewar (1930-1939) ČZ ČZ 125 A ČZ ČZ 125 B ČZ ČZ 125 T ČZ ČZ 125 type 453 ČZ ČZ 125 type 473 - Sport ČZ ČZ 125 type 476 ČZ ČZ 125 type 488 ČZ ČZ 125 type 511 cross ČZ ČZ 125 type 516 cross ČZ ČZ 125 type 519 cross ČZ ČZ 125,150 C ČZ ČZ 175 rikša type 505 ČZ ČZ 175 skutr type 501 ČZ ČZ 175
Our Price 16.16 EUR
MOTIP - Refractory paint for cylinders and exhausts, BLACK (HEAT RESISTANT) MOTIP HEAT RESISTANT Spray can be used to repair surfaces that have been exposed to very high temperatures. Suitable for use on exhaust pipes, ovens, grill etc. They can be sprayed on bare metal. No primer necessary! QUALITY AND PROPERTIES High temperature resistance to 800°C Good coverage and filling power Excellent
Our Price 11.86 EUR
MOTIP - Refractory paint for cylinders and exhausts, SILVER (HEAT RESISTANT) MOTIP HEAT RESISTANT Spray can be used to repair surfaces that have been exposed to very high temperatures. Suitable for use on exhaust pipes, ovens, grill etc. They can be sprayed on bare metal. No primer necessary! QUALITY AND PROPERTIES High temperature resistance to 800°C Good coverage and filling power Excellent
Our Price 11.17 EUR
Stones for honing cylinders tool (32-90mm) for drill Note: 50 mm long stones intended for honing tools 32 - 90 mm. Set includes stones (3 pcs) and mounting pins.
Our Price 3.60 EUR
Thread of spark plug M14, repair - JAWA,ČZ,SIMSON,MZ ČZ ČZ 125 A ČZ ČZ 125 B ČZ ČZ 125 T ČZ ČZ 125 type 453 ČZ ČZ 125 type 473 - Sport ČZ ČZ 125 type 476 ČZ ČZ 125 type 488 ČZ ČZ 125,150 C ČZ ČZ 175 rikša type 505 ČZ ČZ 175 skutr type 501 - two exhausts ČZ ČZ 175 skutr type 502 - one exhaust ČZ ČZ 175 type 450 ČZ ČZ 175 type 470 - Sport ČZ ČZ 175 type 477 ČZ ČZ 175 type 487 ČZ ČZ 250 type 455 ČZ
Our Price 1.80 EUR
Tool for honing cylinders (32-90mm) for a drill Note: The honing device is used for honing (cleaning), i.e. finishing processing of very precise surfaces that require a multi-directional surface structure (e.g. cylinders of internal combustion engines) Note: Honing must be done at low speeds and the cylinder must be lubricated with oil. At the same time, it is necessary to be careful not to get a
Our Price 15.10 EUR
